Skip to product information
Naturtro kranie, 3 dele - eAnatomi
1/8
  • Naturtro kranie, 3 dele - eAnatomi
  • Naturtro kranie, 3 dele - eAnatomi
  • Naturtro kranie, 3 dele - eAnatomi
  • Naturtro kranie, 3 dele - eAnatomi
  • Naturtro kranie, 3 dele - eAnatomi
  • Naturtro kranie, 3 dele - eAnatomi
  • Naturtro kranie, 3 dele - eAnatomi
  • Naturtro kranie, 3 dele - eAnatomi
Lifelike skull, anatomical model in 3 parts

Lifelike skull, anatomical model in 3 parts

1.995,00 kr
Taxes included. Shipping calculated at checkout.
2 left

Pickup available at Frederiksberg

Usually ready in 4 hours

Lifelike skull, anatomical model in 3 parts

Default Title

Frederiksberg

Pickup available, usually ready in 4 hours

Helgesvej 12
2000 Frederiksberg
Denmark

+4529919911
Description

This skull model offers the most lifelike bone structure, the most accurate reproduction of the anatomical details and the feeling of touching real bones. Furthermore, the bone color is slightly yellowish, which makes the skull model appear more realistic. It is produced in SOMSO plastic by the manufacturer SOMSO, which is world-renowned for very high quality. The model is used, among other things, in medical education in Denmark.


The model is cast in a size that corresponds to an adult person. The length is 17.5 cm and the width is 14.1 cm. It weighs approximately 800 grams. The skull cap ("the top") can be removed, so i.a. the base of the skull (basis cranii interna) can be studied. The skull cap is held in place via practical metal hooks and small plastic pins (the plastic pins are only visible when the cap is removed). All the way around the skull, the assembly appears even and discreet when the skull cap is fitted (see the pictures on the left).


The mandible is attached with a spring. It can be easily and quickly dismantled. The skull model can thus be separated into 3 parts.
Anatomically speaking

Anatomically, the human skull can be divided into 2 parts, and the skull model therefore shows the following:



1) The braincase (neurocranium), which is intended to enclose the brain and the hearing-equilibrium organ



2) The facial skeleton (viscerocranium) which surrounds the nasal cavity and forms the tooth-bearing framework around the oral cavity. The 32 teeth are also included



The braincase consists of 8 bones. There are 4 unpaired (the frontal, sphenoid, sphenoid and occipital bones) and 2 paired (the occipital and temporal bones). All these bones as well as sutures can be identified on the skull model.



The facial skeleton includes 6 paired bones (the maxilla, palatine, cheekbone, nasal bone, lacrimal bone, and lower conchbone) and 3 unpaired bones called the mandible, the ploughshare, and the zygomatic bone (some do not count the zygomatic bone as part of the facial skeleton). All these bones and sutures can also be identified on the skull model. NB: The hyoid bone is also included in the facial skeleton but cannot be seen on this skull model.



The human skull contains many holes and channels containing vessels and nerves. Overall, there are connections between the braincase and the neck, to and from the eye socket, to and from the pterygo-palatine fossa and to and from the nasal cavity.



On this skull model, all holes and canals are visible. Overall, the bone quality is extremely good, which is why, for example, knots and depressions in the bone tissue can be seen very clearly. The scope of "osseous landmarks" also includes the smallest details.



Compared to cheaper skull models in our range, it also feels more real. You can feel the authenticity when you hold the bones or the whole skull at the same time and feel the weight.



See possibly The YouTube video below where the skull is demonstrated. The video lasts 2 min and 27 sec.
Movement-wise

In terms of movement, it is only relevant to mention the jaw joint. The lower jaw bone ("mandible") is held in place via a relatively long metal spring, which is attached via screws to the mandible and palatine bone. The metal spring can be easily and quickly removed from the screw in the mandible without the screw having to be removed. Therefore, the mandible can be completely removed in a few seconds.



There are also large pieces of rubber mounted in the joint bowls (fossa mandibularis) of the jaw joints, which hold the joint head (caput mandibulae) "like in a rubber bowl" (see the pictures on the left).



The model's jaw joints are not very flexible. Natural movements in the jaw joint require that, among other things, the articular head can slide forward and downward until the articular head is forward on the tuberculum articulare. The latter is the bony part with a weak guiding groove in front of the depression (fossa mandibularis). This can only be demonstrated on the model if the rubber in the joint cups is removed, which the model is not designed for.



If you take a firm hold of the mandible, you can however move it up and down and to the sides, although the natural sliding joint mechanism as described above cannot be demonstrated at all.
Clinically speaking

Clinically speaking, the skull model is ideal for understanding diseases, disorders and disorders in this part of the skeleton.

CUSTOMER SERVICE
custom-made items

If the product is stated as a made-to-order item, it means that the product is of such a size or such a high quality level that the product is only available on order. Delivery time may vary, but the price will always remain the same! Contact us for more information if you wish to order.
Prices and payment methods
  • Prices are stated in DKK including VAT.
  • You can pay with;
    - EAN no.
    - MobilePay
    - Visa, Mastercard
Right of withdrawal & return
  • The right of withdrawal is 14 days from delivery.
  • Return postage is 60,- when purchasing a label from us (sent as a PDF file via email) or 0,- when returning in person to our address.
  • See our terms and conditions here
Delivery / pickup

If the item is listed as in stock , it is physically located at our address in Frederiksberg and can therefore be shipped or picked up. When ordering, choose what you want.

If you wish to pick up the item, this can often take place immediately after ordering, but must be agreed with us. If you wish to have it shipped , this will be done via Postnord and often the same day the order is received.

If the item is listed as ' shipped directly from the factory ', the delivery time is usually 2-5 business days, but depends on the factory's stock status. If you want more precise information, you can always contact us before ordering.
Facts about eAnatomy
  • Founded in 2004 as a sole proprietorship and converted to ApS in 2019
  • 100% owned by Christian Birksø who is also responsible for the daily operations.
  • Develops and markets both original products, designed and produced by eAnatomi, and distributes many international brands.
  • Sells to both private and commercial customers in Denmark and abroad.

Other products selected especially for you

Our anatomical product range
Kunstplakater - eAnatomi

Raffle for free products

All recipients of our newsletter are entered into raffles for free products. Sign up today and be in the running!